The first step is to turn on the power and release the emergency stop button of the CNC blanking machine. Only in this way can we ensure that the CNC blanking machine has been prepared for start-up.
The second step is to turn on the computer connected to the CNC blanking machine, enter the predetermined operating system, find the software of the control device, and double-click to open the CNC feeder software on the computer.
The third step is to check whether the CNC feeder system is normal. If there are any error prompts about the CNC blanking machine in the system, you can no longer use it to work, find out the cause of the error and repair it.
The fourth step is to measure whether the size of the workpiece will exceed the range of the pneumatic clamp of the CNC feeder, and make adjustments. Once the size of the workpiece is too large, it will affect the normal operation of the equipment to a large extent, and more serious may cause damage to the machine.
The fifth step is to start the pressure device of the CNC blanking machine, and normal processing can be carried out after the test is no problem.
The above is the sequence and requirements for the operation of the CNC blanking machine of the panel furniture production line. During the operation, the customer must strictly follow the requirements. The sequence of each step should not be reversed at will, otherwise it will easily cause unnecessary failures; Operation in order can also improve processing efficiency and quality.